Wood decks & railings
Solution, dwell and a wider rinse—not a narrow blast.
Wood and fence surfaces show dirt quickly, but they also show cleaning mistakes. Too much pressure can raise wood grain, leave wand marks and cut into soft areas. Vinyl fences can trap algae around seams, while composite decks may have manufacturer-specific cleaning limits.
Jacksonville Washers provides deck, fence and selected dock-surface cleaning using a method based on the material, age, finish and condition.
Upload fence or deck photos for a wood-safe quote
Note material (wood, vinyl, composite), access to both sides, and whether staining is planned after dry time.
- Wood-safe controlled rinse
- Vinyl & composite options
- Soft-spot documentation
- Fence & deck photo quotes
Materials
Surfaces We Clean
Composite decking
Manufacturer limits respected when known.
Vinyl & wood fences
Both sides when access and ownership are clear.
Selected docks
After access, material and water protection review.
- Wood decks, stairs and railings
- Composite decking and selected capped boards
- Wood, vinyl and composite fences
- Pergolas, gazebos and privacy screens
- Porch floors and exterior wood details
- Selected dock walkways and riverfront structures
- Outdoor steps, benches and small wood features
Why Lower Pressure Matters on Wood
Too much pressure
- Raises wood grain
- Leaves wand marks
- Can cut soft spots
- Risks vinyl seams and finishes
Controlled approach
- Wood-appropriate solution
- Wider rinse pattern
- Document soft spots first
- Staining coordinated after dry time
Wood fibers can be damaged by a narrow nozzle or close high-pressure pass. Cleaning may rely on a wood-appropriate solution, dwell time and a wider, controlled rinse. Weathered boards, soft spots, splinters, loose fasteners and failing stain should be documented before the work.
Cleaning removes buildup; it does not make worn wood new. Sanding, repair, staining or sealing may be needed after the surface dries. Stubborn marks may need specialty stain cleaning. Nearby house walls often pair with house washing.
Fence Washing
Vinyl fences often collect green buildup near irrigation and shaded landscaping. Wood fences may gray, stain unevenly or hold organic growth. Composite materials vary. Each fence should be checked for loose panels, weak posts, oxidation, old coatings and nearby plants.
Both sides can be cleaned only when access and property boundaries are clear. Neighboring property, gates and pets should be considered before scheduling.
Deck Cleaning Before Staining
If staining is planned, coordinate with the coating manufacturer or painter. The deck may need cleaning, brightening, sanding, repairs and adequate dry time. Washing alone is not full coating preparation, and applying stain too soon can trap moisture.
Concrete patios without wood are covered under driveway and concrete cleaning.
Jacksonville Wood-Surface Conditions
Decks beneath mature trees in Riverside, Avondale, Mandarin and Arlington can hold shade and leaf tannins. Riverfront and coastal structures face moisture and salt-air exposure. Fences near irrigation may develop repeated streaking at the same height. Cleaning should address the visible buildup while acknowledging the conditions that may bring it back. Local references are listed under service areas.
Visual proof
Fence and deck surfaces, revived
Organic growth lifts without a narrow high-pressure nozzle chewing into wood fiber.
Before
After
Social proof
What Jacksonville customers say
Cedar fence was gray and fuzzy. They used a wood-appropriate approach and flagged soft boards before we restained.
Composite deck had mildew in the shade. Gentle clean, no fuzzy grain, ready for us to reseal on our schedule.
Both sides of the vinyl fence where we had access. Algae came off without scarring the panels.
Swap these placeholders for verified Google or Facebook reviews before launch.
Answers
Frequently Asked Questions
Can you use a pressure washer on a wood deck?
Yes, but the pressure, nozzle, distance and cleaning solution must suit the wood. A hard close pass can scar boards and raise the grain.
Will deck cleaning remove old stain?
It may remove loose or failing material, but complete stain stripping is a separate restoration process and often requires chemical stripping and sanding.
Can you clean both sides of my fence?
Yes when access and ownership are clear. Gates, neighboring property and landscaping should be discussed first.
How long should wood dry before staining?
Drying depends on weather, shade, wood moisture and the coating requirements. Follow the stain manufacturer’s moisture guidance rather than a fixed number of hours.
Do you clean docks?
Selected dock walkways and structures may be cleaned after access, material, water protection and safety requirements are reviewed.
Upload fence or deck photos for a wood-safe quote
Note material (wood, vinyl, composite), access to both sides, and whether staining is planned after dry time.
- Wood-safe controlled rinse
- Vinyl & composite options
- Soft-spot documentation
- Fence & deck photo quotes
Faster quotes with photos
Upload wide shots and close-ups on the contact form. Mention Deck & fence cleaning so we route your request correctly.
Open photo upload formOr email images to hello@jaxpropressurewash.com/